PP & HDPE Agricultural Ball Valve
Three Piece Screw End (Black)
| Bill of Material | |||||||
| Sr.No. | Part | Qty. | Material | ||||
| 1. | Body | 1 | Polypropylene | ||||
| 2. | Ball | 1 | P.P.R. | ||||
| 3. | Screw Connector | 2 | Polypropylene | ||||
| 4. | Seats | 2 | PTFE / LD / HDPE | ||||
| 5. | Stem | 1 | P.P. Reinforced with M.S. | ||||
| 6. | Bearing | 1 | Teflon | ||||
| 7. | Stud & Nut | 5 to 10 | M.S. Zinc plated / S.S. 304 / S.S.316 | ||||
| 8. | Body "O" Ring | 2 | Neoprene / Teflon | ||||
| 9. | Stem "0" Ring | 1 | Neoprene / Viton | ||||
| 10. | Handle | 1 | P.P. Reinforced with M.S. | ||||
| 11. | Pin | 1 | S.S. 304 | ||||
| |
|||||||
| Technical Data | |||||
| Construction | Multi Piece Body | ||||
| Design | Three Piece | ||||
| Size Range | 15mm. to 100mm. | ||||
| Max working temp. | 90°C (Consistently) | ||||
| Gasket/Stem Seal | Neoprene or as specified | ||||
| Test Pressure | 15 kg | ||||
| |
|||||
| Important Parameters of Valves | ||||||||||
| Valve Size | Length Face to Face |
Height Centre (H) | ||||||||
| 15(1/2") | 87 | 71.5 | ||||||||
| 20(3/4") | 136 | 77 | ||||||||
| 25(1") | 103 | 90 | ||||||||
| 32(1.1/4") | 132 | 110 | ||||||||
| 40(1.1/2") | 132 | 110 | ||||||||
| 50(2") | 161 | 117.5 | ||||||||
| 65(2.1/2") | 188 | 147.5 | ||||||||
| 80(3") | 218 | 162 | ||||||||
| 100(4") | 256 | 185 | ||||||||
| |
||||||||||
| Special Features of Three Piece Screw End (Black) | ||||||||||
| 1. Available in Flange Type in 15 mm to 150 mm and in Screw Type in 15 mm to 100 mm. | ||||||||||
| 2. Manufactured from Poly Propylene, a Chemically inert thermoplastic. | ||||||||||
| 3. Can be used upto 90°C Temp. | ||||||||||
| 4. Hydraulically and Pneumatically tested for 15 kg upto 4". | ||||||||||
| 5. Protective and Resistive from most of the corrosive Chemicals. | ||||||||||
| 6. Exelent U.V. stabilty due to presence of carbon black. | ||||||||||
| 7. Heavy duty valve can last for years after installation. | ||||||||||
| |
||||||||||
